Ocean Alchemy, Technical Notes
Have you had your ORMUS material analyzed?
Yes. I have had all of my Mannas assayed by either MS/ES ICP or Neutron
activation. While these methods do not allow us to see the ORMUS/M-state
content they tell us whether there are any toxins or metals in them. My
assays have all come back "clean." I have also done extensive
testing of the metallic form of some of the precipitates. I have taken
examples from the same batches/lots as were assayed as above and have
reduced them to their metallic nature. I then had them analyzed by MS/ES
ICP and Fire Assay. So I have a good idea of what the materials content
actually are.
I am keeping my analysis results as proprietary information until I
have acquired enough information to publish, mainly because if these are
performed improperly the result can be potentially toxic and the processes
themselves are rather dangerous.
A point worth noting is that when these precipitates are dried improperly
they immediately begin to revert to a metallic form. So those of you who
may be interested in the ORMUS crystals that are being offered for sale
should be aware that these crystals may actually be metallic in nature.
Have they been assayed? What is their pH? Do ask.
The crystals are a byproduct of the "marriage" process which
I developed a few years ago. Where the top water containing the oils from
the opening of the elements is evaporated to concentrate the oils for
addition to the precipitates making an Alchemically complete Manna. Hence
the "marriage."
As these materials approach their proper concentration the gentle heat
is removed and as it cools the crystals form. The concentrated "waters"
on top of them contain the oils and this is added to the washed precipitates
which greatly enhances their potency.
However, again there is ART involved. If these are made from ocean water
precipitates there is definitely a Gilcrest precipitate amounting to about
60 ml. per gallon by volume of Atlantic ocean water which must first be
removed or these potentially heavy metals will be concentrated into the
oil/salt matrix... and into the crystals. The process of removal is a
lengthy one which is why I have never before offered the crystals to the
public.
Also the pH of the solution to be processed is important or you will
have concentrated hydroxides of sodium, calcium and magnesium form along
with the crystal/oil matrix. I would not recommend consuming these in
this concentrated form.
However, again :) there are crystals which can be safely ingested such
as those made from certain salts and processes. The major ones being those
made from the opening of pure gold, copper, and the products of the Dry
Method process.
I have grown ORMUS copper crystals. They naturally formed into stepped
pyramids of several inches in size. When I dried them via my process they
literally turned to a pure, white dust which had both major psychoactive
and energetic properties. When I shone a flashlight beam upon the crystals,
they amplified light to an amazing degree :)
Remember that they must be properly dried or they will want to begin
to revert to a metallic nature. I use a vacuum drying process which is
quite involved and I won't elaborate here. Suffice it to say that
if you do not perform this properly you will have metals. An ES/MS ICP
analysis will show this to you.
I have been using the remaining properly dried salts to make ORMUS oils.
I use enough of the concentrated oil/crystal matrix to perform the marriage
and the remaining I extract with a cold pressed organic oil such as grape
seed, almond, olive oil, etc. I have spent several years perfecting the
extraction processes and the results have been impressive. The ORMUS is
absorbed through the skin and relieves sores, bruises, muscular aches
and has even helped to repair torn ligaments in a friend's shoulders
where before she could not raise her arms she now has complete, normal
mobility without pain. This took about a month.
If anyone would like to sample some of these or would like to acquire
the properly grown crystals please contact us by e-mail. Before I can
make them in larger quantities, I need to acquire a lot of expensive Nalgene
flasks and cylinders that are necessary. The oils will not adhere to them,
making the processing both easier and more effective.
The oil of honey is one which has taken a lot of my time. The process
was elucidated to a nurse in her dreams by an angel during the 19th century.
It is the Angelic Wine of Honey by name. It is loaded with ORMUS/M-state!
The current analytical processes which are available do not identify
the ORMUS/M-state elements. But they do show you if there are any nasties
in the analyzed material. Right now, the best way to know what you have
is to convert it to its metallic nature and then have another assay performed.
If the Alchemist does not know how to do this then there is no way he/she
will know definitively what they have. A kicker to this which makes this
even more complex is that the materials continue to change in a evolutionary
manner. So the best I can do is continue this line of research along side
of making sure that the Manna is a pure one while Working along the path
which has been shown to me. It is all in the Egyptian and early Vedic
texts.
Hope this tells you everything you want to know and nothing that you
don't :)
Why is the Manna Wet?
I feel that I have to speak a few words relating to why I feel that
the elixir forms of the ORMUS elements are superior to the dry powder
forms. And tell you why there is water above precipitates in the bottle.
First some background. In his Portland lecture David Hudson said:
"This little zero point frequency I showed you between the positron
and the electron; if you follow that right up the electromagnetic spectrum,
it agrees with the molecular frequency of hydrogen dioxide, or water.
So there is an affinity for this material and water. That's why it
is normally taken in water. When you come to understand that your body
is, in fact, mainly water. That, literally, this material when you distill
water it distills with the water as the auride, the iridide, the ruthidide.
Just like chlorine. And so if you distill water thinking you are getting
high purity water, it goes with the water. And it literally changes the
bond angles of the water. That one iridium atom controls 56 waters of
hydration around itself. And all the bond angles of all 56 waters are
altered when iridium is present. I haven't carefully studied the research
work of people working with water but I strongly suspect that their water
isn't completely pure and they are finding that the bond angles can
be changed. There is something else besides H2O in the water."
This above is just one of the reasons why I have always concentrated
on providing the Manna in its wet form. And the major reason why there
is an abundance of water in the bottle. It (the top water) is all structured
but also contains a water soluble form of the ORMEs, a monomer, as you
can read more about below.
You may or may not have noticed that I do not provide it in a dry form.
There are several reasons for this and none of them are laziness.
David Hudson had something important to say on this topic. Please keep
in mind that not only does gold have a pesky odd-spin electron but so
do Rhodium, Iridium, Copper and Cobalt.
Here is an excerpt from David Hudson's Australian Patent: http://www.subtleenergies.com/ORMUS/patents/Ozpatent.htm
"It is known that there exists a critical size, in the range of
3-20 atoms, for Pd II, Ag I and Au III, by way of example, which is necessary
for metal deposition from solution. As the number of atoms in the T-metal
cluster decreases through continuous evaporation in the presence of NaCl,
the solution becomes a solution of diatoms which in the case of gold is
represented as Au-1 - Au+1 i.e., Au-1 bonded to Au+1. The rationale for
this representation of a gold diatom is based upon the fact that a single
gold atom has an odd spin electron, as does rhodium, iridium, gold, cobalt
and copper of the T-metals. In a diatom of gold, the two odd spin electrons
will be found on one of the two atoms but not both. Thus, a diatom of
gold is made by a bond between an aurous (Au+1) atom and an auride (Au-1)
atom."
<< interrupt snipping...
Are you still with me? At this point we have diatomic gold and salt
and the gold still will assay as gold metal.
Continuing the snip...
"The present invention enables the breaking of the diatom bond
by introducing a more electro-positive element, such as sodium or any
alkali or alkaline earth elements, which does not have a d orbital overlap
capability. This element replaces the aurous (Au+1) forming, in this case,
a sodium auride. In effect, the sodium weakens the d orbital overlapping
energies between the atoms of the gold diatom as well as elevating a d
orbital electron towards the s orbital, thereby creating a negative potential
on the surface of the atom. This negative potential enables an interaction
of the s orbital with chemiabsorbed water through electron donation and
reception."
<
You are now reading about the importance of both sodium and water in
this scenario using gold as the object element illustrated.
>>continue snip...
"The sodium auride, when in aqueous solution at or near neutral
pH, will form sodium hydroxide and a monomeric water-soluble auride."
>>Interrupt the snip...
Here above is the meat of the biscuit or the crust of the tomato :)
"Water soluble auride." This is why the water above the white
precipitate in the Manna bottle is just as "good" as the white
precipitate itself.
The M-gold in my Golden Tear IS in this form. It is kept stable by the
ratio of gold to sodium to water. A symbiotic triangle.
>>Continue snip...
"The monomeric auride (Au-1) is unstable and seeks a lower energy
state which is represented by a partial filling of the d and s orbitals.
This lower energy state with its greater stability is achieved by the
electron-donating and removing capability of H2O.
Water can act to remove electrons. Water molecules possess a net charge
and attach to each other in vertical clusters so that an 18 molecule water
cluster can hold a cumulative potential of -2.50 V. The potential of a
water molecular cluster, at near neutral pH, is sufficient to remove an
electron from the d orbital and create a positive hole, enabling a pairing
between opposite spin electrons from the d to s orbitals to take place.
The existence of the electron pairing is confirmed by infrared analysis,
illustrated in FIGURE 4, which identifies the vibrational and rotational
motions caused by energy exchange between these two mirror image electrons."
>>>END OF SNIPPING
In my opinion, in a solution such as that obtained from the HCL/H2O2
process with gold, at near neutral pH you have Au- and Au+ which can relate
with compatible elements that may be in the solution.
So Au- is likely to associate with Na+ or H+ and; Au+ is likely to associate
with Cl- or OH- or even AuOx (all with excess H2O) and this is where it
gets complicated.
Through constant disassociation of the water where the oxygen is known
to remove electrons from hydrogen, forming OH- and H+, this H+ is free
to form with Au-. However, when larger (heavier) clusters are formed,
such as AuOH or AuOx then these are the "oxides" which precipitate
out of solution and fall to the bottom of the beaker in the HCL/H2O2 process.
There are still HAu in solution (the top water) as evidenced by the
fact that I can take the solution, separated and filtered from the precipitates,
and over time get gold metal to form from it after performing processes
on it. I call the virgin solution the Golden Tear.
Because of that fact I can find no legitimate reason to assume that
all of the possible reactions listed above are not actually occurring.
Remembering from the snippets above, that one iridium atom controls
56 waters of hydration around itself and that 18 clusters of water provide
potential to keep the Au from wanting to make metallic bonds in the presence
of NA then there exists a strong possibility that the waters above the
Manna are absolutely necessary for its stability and that the polarity
of this water is aligned to the M-state/ORMUS elements contained within.
We NEED to have an excess of water! This is most important where we
have a Manna like M-3 where there is M-rhodium, M-iridium and M-gold present.
They all began with that dreaded odd-spin electron.
For these reasons, I have to believe that the wet "Manna"
form is far superior to any dry powder form in stability, energy and assimilability.
This is beginning to become a long email so I'll let that digest
for a while. I mainly wanted to illustrate why your Manna bottles "appear"
to contain less white powder than some think that they should. Many years
ago the Essene and I talked about this at length. He told me that he mostly
explains it in the simple terms. "That it is brought to a strength
that is best for the Human Body." And that he just drops the topic
at that point.
After all of this typing...I can understand why :)
Peace and light ~
Don Nance
|
Friendly
See
our full line of Ocean Alchemy Products
