Application of Bio-Zyme

Purpose:

Treatment of lagoons, stock tanks, or ponds affiliated with animals, including (but not limited to) poultry, swine, or cattle.

Application Rate:

Mix 2 gallons Bio-Zyme for each acre of surface area with an adequate amount of water. This form of treatment does not require a specific ratio of Bio-Zyme to water. However, water is always needed to activate Bio-Zyme.

Application can be achieved by air or ground rig with proper calculation of surface area.

Frequency of application: every 3 days for 2 weeks, then 1 time per week or as needed to control odour.

Ask us about Bio-Zyme with lagoon influents via metering pump in order to avoid repeated surface spraying.

Treatment of Dry Litter

Mix 16 oz of Bio-Zyme with 12 gallons of water for 1000 square feet of area to be treated. Key areas to spray: waterers, roosts, and wall condensation.

Frequency of application:

3 times in 3 day intervals Reduce to only weekly for 3 weeks.

Then apply once every two to three weeks or as needed.

Treatment of Dairies:

Due to varying conditions please consult your dealer for location specific ratios and application rates.

Safety Disclaimer

When used as directed, Bio-Zyme is non-flammable and non-toxic to animals and humans, and non-corrosive to steel, brass, or galvanized metal. Keep out of Reach of Children.  May irritate eyes. May be harmful if swallowed.